Building corner details
The building corners are done the same way as the outer window frames, made from 1/16 x 1/4 Balsa and pre-painted and glued overlapping the edges of the building. The corner of the wall showing the edge of the wood should be covered first and laid flush with the edge of the back wall.
in this picture I actually did it backwards but luckily the piece completely covered the rough end of the wood.
Then the other piece is installed and should cover the end of the other board that was installed. After instillation you can paint them with a second coat to help hide the joint line somewhat.
Above is another view showing the rough edge of the wood on the back wall is now covered.
Back to Window Details Building Index Next Chapter (roof & finishing touches)