• At the first window, put a dot next to I want to setup my Internet connection manually
  
  
• Click Next

• Put a dot next to I connect through a phone line and a modem.
  
  
• Click Next

• In the Telephone number box, type your local dial up number (found here)
  
  
• Remove the check next to Dial using the area code and country code.
  
  
• Click the Advanced button.
  
  
• Click the Connection tab.

• Put a dot next to PPP (Point to Point Protocol).
  
  
• Put a dot next to None under the Logon procedure section.
  
  
• Click the Addresses tab.

• Put a dot next to Internet service provider automatically provides one.
  
  
• Put a dot next to Always use the following under the DNS server address section.
  
  
• In the Primary DNS server box, type 205.238.128.39
  
  
• In the Alternate DNS server box, type 205.238.128.42
  
  
• Click OK
  
  
• Click Next

• In the User name box, type your realtime.net email address
  
  
• In the Password box, type your password.
  
  
• Click Next

• In the Connection name box, type Realtime
  
  
• Click Next

• If you have Outlook Express installed, you will be prompted
  with this window. If not, you can skip this screen.
  
  
• Otherwise, put a dot next to No
  
  
• Click Next

• At the last screen, uncheck the To connect to the internet immediately... box.
  
  
• Click Finish

Your computer should now be setup to connect to the internet!
Open up Internet Explorer and it should automatically try to dial and connect.