Realtime Communications Help Center

Set up using Internet Connection Wizard
with Internet Explorer 4.0
These images are only screenshots. Please use these images as an example of what you should see on your own computer.
  • At the first window, put a dot next to "I have an existing Internet account"

  • Click Next
  • Put a dot next to Select this option if you are accessing the Internet using an Internet service provider or a local area network (LAN)

  • Click Next

 

  • Put a dot next to Connect using my phone line

  • Click Next
  • In the Telephone number box, type your local dial up number (found here)

  • Remove the check next to Dial using the area code and country code

  • Click Next

 

  • In the User name box, type your realtime.net email address

  • In the Password box, type your password.

  • Click Next
  • At the Advanced Settings window, put a dot next to Yes

  • Click Next

 

  • Put a dot next to PPP (Point to Point Protocol)

  • Click Next
  • Put a dot next to I don't need to type anything when logging on

  • Click Next
  • Put a dot next to My Internet service provider automatically provides one

  • Click Next

 

  • Put a dot next to Always use the following.

  • In the DNS server box, type 205.238.128.39

  • In the Alternate DNS server box, type 205.238.128.42

  • Click Next
  • In the Connection name box, type Realtime

  • Click Next
  • If you have Outlook Express installed, you will be prompted
    with this window, put a dot next to No.

  • Click Next
  • Put a dot next to No

  • Click Next
  • Put a dot next to No

  • Click Next

 

  • At the last screen, click Finish
Your computer should now be setup to connect to the internet!
Open up Internet Explorer and it should automatically try to dial and connect.