Realtime Communications Help Center
-
Linux / Unix / BSD
Gnome-ppp
These images are only screenshots. Please use these images as an example of what you should see on your own computer.
- From your favorite terminal, just type gppp then press
enter.
- When first launching gnome-ppp there are a number of steps
that have to be run through before it is useable.
- Click on the Account menu
- Choose New
- Click on the Dial tab.
- In the Account Name box, type Realtime
- In the Modem Device drop down list, select the correct modem
- In the Phone Numbers box, type your local dialup number (found
here)
- Click the Add button to add the phone number to the
list.
- Click on the Authentication tab.
- In the User Name box, type your realtime.net email address
- In the Remote Name box, type your realtime.net email address
- In the Password box, type your password.
- Click on the IP Address tab.
- Under the Local IP Address section, put a dot next to Dynamic.
- Under the Netmask section, put a dot next to Dynamic.
- Under the Remote IP Address section, put a dot next to Dynamic.
- Click the DNS tab.
- In the IP Address box, type 205.238.128.39, then c
- C lick the Add button.
- Again in the IP Address box, type 205.238.128.42
- Click the Add button.
- In the Domain name box, type realtime.net
- Click the Add button.
- Click on the Script tab.
- Make sure all of the boxes on this page are empty.
- Click the PPP tab.
- Put a dot next to Add Default Route and Lock Dialout Device.
- In the Maximum Transmission Unit box, type 552
- In the Maximum Receive Unit box, type 552
- Click OK
- Your connection should now be setup!
- Every time you open gnome-ppp just click the Connect button
If you would like more information and updates at www.gnome.org