Macintosh OS 8 & 9 - Internet Setup Assistant

Realtime Communications Help Center Macintosh OS 8 & 9 Using the Internet Setup Assistant
These images are only screenshots. Please use these images as an example of what you should see on your own computer.
Click on Hard Drive -> Internet -> Internet Setup Assistant. At the first window, click the Update button.

			At the introduction, click the right arrow.

Put a dot next to Add Internet configuration Click the right arrow.

			In the What would you like to name this configuration box, type Realtime Put a dot next to Modem. Click the right arrow.

In the Which modem are you using box, select your modem. In the Which port is the modem connected to drop down list, select Modem Port Put a dot next to Tone. Click the right arrow.

			In the Phone number box, type your local dialup number (found here) In the User ID box, type your realtime.net email address In the Password box, type your password. Click the right arrow.

Regarding IP Address, put a dot next to No Click the right arrow.

			In the DNS Address box, type 206.66.10.94 On the next line, type 206.138.224.150 In the Domain Name box, type realtime.net Click the right arrow

In the Email address box, type your full email address. In the Email password box, type your password. Click the right arrow.

			In the Email account box, type username@pop3.realtime.net, where username is replaced by your actual username. In the Email host box, type smtp.realtime.net Click the right arrow.

In the NNTP host box, type news.realtime.net Click the right arrow.

			At the final window, uncheck the Connect when finished box Click the Go Ahead button.

You should now be setup to connect to the Internet!